Bearings, belts, chains, adhesives, and maintenance supplies for mechanical systems.
171-210-061 is a flow monitor / oil flow sensor by SKF used in centralized oil circulation lubrication systems. It detects and monitors the flow of lubricant (typically oil) within the system to ensure proper circulation and system performance, and is rated for typical operating conditions in industrial lubrication applications.
169-400-130 is a tapered roller bearing set by SKF, consisting of a cone and cup matched pair designed to handle combined radial and axial loads. It delivers high load capacity and durability for heavy-duty and industrial machinery applications.
150E is a tapered roller bearing by SKF designed to handle combined radial and axial loads. It offers robust performance and long service life in applications like gearboxes, automotive hubs, and heavy machinery.
1077589/3 is an insert ball bearing by SKF, designed for use in mounted bearing units. It provides reliable support for rotating shafts with ease of installation and replacement, making it suitable for industrial machinery and equipment.
6006-2RS1 is a sealed deep groove ball bearing by SKF with rubber seals on both sides. It features reliable performance, low friction, and effective protection against dirt and moisture, making it suitable for electric motors, pumps, gearboxes, and general industrial applications.
21315 EK/C3 is a spherical roller bearing by SKF, with a C3 internal clearance (greater radial play than standard) for better performance under thermal expansion and misalignment. It supports heavy radial and axial loads and is widely used in industrial equipment such as gearboxes, conveyors, and heavy-duty machinery.
AC-A-420 is a lubrication spray nozzle by SKF, used in centralized automatic lubrication systems. It features a stainless-steel body and dual oil outlets, delivering controlled micro-doses of oil to bearings and moving parts for consistent lubrication and reduced wear in industrial machinery.
FYTB 20 TF is an oval flanged ball bearing unit (mounted bearing) by SKF, featuring a 20 mm bore and a 2-bolt oval flange design. It combines a bearing insert in a cast iron housing with set-screw locking, providing stable support for rotating shafts and reliable performance in industrial machinery and material handling applications.
6310ZZ is a shielded deep groove ball bearing by NSK, featuring metal shields on both sides for protection against dust and debris. It delivers smooth rotation, low friction, and reliable performance in motors, pumps, gearboxes, and general industrial equipment.
HR32017XJ is a spherical roller bearing by NSK designed to support heavy radial and axial loads while accommodating shaft misalignment. It delivers robust performance and durability in industrial and heavy-duty machinery applications.
7907CTRDULP3 is a high-performance deep groove ball bearing by NSK, featuring enhanced internal design, C3 internal clearance, and double metal shields. It provides smooth rotation, good contamination protection, and long service life for high-speed industrial and machinery applications.
XY-TB1610 is a linear bearing / guide block from NSK designed to support and guide linear motion in machinery and automation systems. It delivers smooth, low-friction movement and precise positioning for applications such as CNC machines, robotics, and material handling equipment.
R10ZZ is a shielded deep groove ball bearing by NSK with metal shields on both sides. It provides smooth rotation, low friction, and protection against moderate dust and contaminants, making it suitable for general machinery, electric motors, and equipment with moderate environmental exposure.
MSF 40 is a mounted ball bearing unit typically supplied under NSK/RHP branding. It consists of a bearing insert mounted in a housing, providing a ready-to-install support for rotating shafts. This unit delivers dependable performance, ease of installation, and reliable operation in industrial machinery and material-handling applications.
3306BTNG is a tapered roller bearing by NSK, designed to support combined radial and axial loads in rotating machinery. It features precision-ground rollers and robust construction for durability and long service life in automotive and industrial applications.
22207EJW33 is a spherical roller bearing by NSK with a tapered bore (adapter sleeve/separable design) and optimized internal geometry. It is engineered to support heavy radial and axial loads, accommodate shaft misalignment, and deliver reliable performance in industrial applications like gearboxes, conveyors, and heavy machinery.
508-00-20-00 is a hydraulic or pneumatic component by Parker, typically part of their fluid power or motion control product range. It is designed to provide reliable performance and compatibility in industrial systems for controlling fluid flow or mechanical movement.
3721330 is a hydraulic filter element by Parker, designed to remove contaminants from hydraulic fluid. It provides reliable particulate filtration to protect pumps, valves, and actuators, helping ensure efficient, long-life performance in industrial and mobile fluid power systems.
3781724 (model F1-025-M) is a hydraulic filter element by Parker, designed to remove contaminants from hydraulic oil. It provides reliable particle filtration to protect pumps, valves, and actuators, improving system life and performance in industrial and mobile hydraulic applications.
29124M is a hydraulic fitting or adapter by Parker, used to connect hoses, tubes, or components in fluid power systems. It provides secure, leak-resistant connections for reliable performance in hydraulic and pneumatic installations.
30P-2S-0000 is a hydraulic directional control valve by Parker, used to direct fluid flow within hydraulic systems. It provides reliable switching of circuits for controlled actuator motion in industrial and mobile hydraulic applications.
20G-45-0440-BF is a hydraulic cartridge valve by Parker, designed for precise control of fluid flow and pressure in hydraulic systems. It delivers reliable performance and durability for industrial and mobile equipment applications.
2003-PB-00 is an industrial fluid power component by Parker, typically used in pneumatic or hydraulic systems for controlling flow or pressure. It delivers reliable performance and durability in automation and machinery applications.
2004-EN-00 is a hydraulic or pneumatic component by Parker, typically part of their motion control or fluid power product range. It’s designed to provide reliable performance and compatibility in industrial systems for controlling fluid flow or mechanical movement.
5PX1500IRTN is a line-interactive UPS (Uninterruptible Power Supply) from Eaton’s 5PX 1500i RT2U Netpack range, designed to protect servers, networking equipment, and critical electronics from power disturbances. It offers 1500 VA / ~1350 W output with pure sine-wave output, a convertible rack/tower 2U form factor, LCD status display, integrated UPS management interfaces (USB/serial), and can include network management capability for remote monitoring and shutdown control.
5P850IG2 is an industrial electrical component by Eaton, typically used in control or power distribution systems. It provides dependable performance and compatibility within Eaton’s range of electrical and automation products for industrial applications.
5E1200UD is an industrial control relay / electrical component by Eaton, used in automation and control systems to switch circuits and provide reliable signalling or control functions in electrical panels, machinery, and industrial installations.
4A55505H01 is an electrical control component by Eaton, typically used in industrial automation or electrical systems. It provides reliable performance and compatibility for control, protection, or switching functions within machinery and industrial installations.
40071361580 (CM.1 1,7A DC) is a DC magnetic motor starter / contactor by Eaton, rated for approximately 1.7 A DC. It is used to control and protect small DC motors and solenoids in industrial automation, providing reliable switching and overload protection for DC power control applications.
2710-3, also identified by the internal reference VE972361, is an industrial control relay by Eaton. It is used in electrical control systems to switch circuits, provide dependable signalling, and support automation logic functions within machinery and control panels.
22830236000 (EVG 97236) is an industrial control relay by Eaton, used in electrical control and automation systems to switch circuits and provide reliable signalling or control functions. It is designed for dependable performance in control panels, machinery logic sequences, and industrial electrical installations.
22710906000 is a CAEG series control relay by Eaton, designed for industrial electrical control and automation. It provides dependable switching and signal control for circuits, ensuring reliable operation in control panels, machinery controls, and protection systems.
Emerson 00975-9000-0007 is a Rosemount industrial temperature sensor (RTD) designed for accurate temperature measurement in process and plant automation environments.
Emerson 00644-6402-2005 is a Rosemount 644 series temperature transmitter that converts a temperature sensor input (typically a 3-wire RTD like Pt100) into a 4–20 mA analog output signal for process control systems.
Emerson 785971-01 (PXIE-1095) is an industrial control/processor module used within Emerson process-automation and PLC systems.
Emerson 5X00500G01 is a 32-channel digital output I/O module designed for use with the Emerson Ovation™ Distributed Control System (DCS). I
Emerson IC755CBS06RDA is an industrial PLC system module used in Emerson QuickPanel/ControlBlade and legacy PLC platforms.
Emerson 03095-0810-0001 is a Tri-Loop signal converter / DCS module from Emerson Fisher Rosemount, also referenced as Rosemount Model 333U.
Emerson 375 Field Communicator is a universal handheld field device communicator used in process automation to configure, calibrate, diagnose, and troubleshoot smart field instruments.
Emerson 1X00416H01 (WH5-2FF) is an industrial power supply module used in Emerson Ovation and process-control systems.
Aquamine™ Series 2970 Plain End Pipe Coupling is a mechanical pipe coupling designed to join plain-end pipes securely in fluid handling systems. It provides reliable sealing, easy installation, and robust performance in water, wastewater, and industrial piping applications.
VHCT900 Hole Cutting Tool is a portable industrial cutting tool designed to drill and cut precise holes in metal pipes and structural materials. It delivers efficient, accurate performance for on-site fabrication and installation tasks in mechanical, plumbing, and piping work.
CG336 Portable Cut Grooving Tool is a handheld mechanical tool used to cut and groove pipes for installation of grooved couplings and fittings. It enables precise, clean grooves on metal pipe surfaces, improving fit and joint integrity for fire-protection, HVAC, and industrial piping work.
Style L77 Cast Carbon Steel Flexible Coupling is a shaft coupling designed to connect rotating shafts while accommodating misalignment and dampening vibration. Made from rugged cast carbon steel, it delivers reliable torque transmission and durability for industrial power-transmission and machinery applications.
FireLock™ Installation-Ready™ Grooved Fittings are mechanical pipe fittings engineered for grooved-end piping systems. They provide secure joints with quick assembly using grooved couplings, ensuring reliable performance, leak resistance, and ease of installation in fire-protection and industrial piping applications.
Style W257 Dynamic Movement Joint is an industrial expansion joint designed to absorb axial, lateral, and angular movement in piping systems. It accommodates thermal expansion, vibration, and mechanical displacement to protect equipment and piping integrity in demanding industrial environments.
Series 725T Diverter Valve is an industrial pneumatic valve designed to automatically redirect airflow between multiple lines in compressed air systems. It enables smooth switching of flow paths for control and automation tasks, offering reliable performance and long service life in factory and process applications.
FireLock™ Installation-Ready™ Style 009V is a rigid coupling designed for securely joining shafts in mechanical power transmission systems. It provides precise shaft alignment and strong torsional stiffness, making it ideal for heavy-duty industrial applications where minimal shaft movement and robust load transfer are required.
Timken lubricants and greases are formulated to extend bearing life and protect against wear, corrosion, and harsh conditions. Used with Timken rolling bearings and mounted units, these lubrication products help ensure smooth operation and reduced maintenance intervals in industrial applications.
Timken shaft alignment tools (laser and precision kits) enable accurate alignment of rotating shafts, improving machine reliability, reducing vibration, and extending bearing and coupling life. These tools are essential for maintenance and installation in pumps, motors, and compressors.
Timken needle roller bearings are compact, high-capacity bearings designed for limited radial space applications. With long, thin rollers providing large contact surface area, they deliver excellent load capacity for gearboxes, pumps, transmissions, and automotive drives.
Timken split roller bearings allow easy installation and maintenance without shaft disassembly in large industrial equipment. Designed for heavy radial loads, these bearings are ideal for mills, crushers, compressors, and conveyors where downtime reduction and rugged performance are critical.
Timken mounted bearing units (pillow blocks, plummer blocks, flange mounts) combine precision bearings with engineered housings to simplify installation and maintenance. These units are ideal for conveyors, agricultural equipment, and industrial drives needing robust shaft support and easy servicing.
Timken precision ball bearings provide low-friction support for rotating shafts and are often used in servo motors, spindle applications, machine tools, and industrial equipment where smooth motion and accuracy are critical.
Timken spherical roller bearings are engineered for applications with misalignment and heavy radial loads, offering robust performance in harsh industrial conditions like mining, paper mills, and heavy machinery. Their self-aligning design reduces stress and extends service life.
Timken tapered roller bearings are high-performance rolling-element bearings designed to carry combined radial and axial loads in industrial machinery such as gearboxes, motors, conveyors, and automotive applications. The tapered design provides excellent stiffness, long service life, and dependable performance in heavy-duty environments.